-
(Modelo estándar) Mini cargadora de ruedas (Modelo EURO5) Mini cargadora de ruedas Cargadora hidrostática EPA Cargadora eléctrica Cargadora retroexcavadora Cargadora de pluma telescópica Cargadora de orugasMontacargas de contrapeso diésel Montacargas todoterreno articulado delantero Montacargas todoterreno articulado trasero Montacargas eléctrico de contrapeso
Lifting Equipment 5ton Lifting Capacity for Exporting
ESPECIFICACIONES
Potencia máxima del motor
Peso operativo
Capacidad de elevación máxima
Descripciones
Laigong forklift door frame is made of 20 manganese silicon channel steel to ensure the hardness of the door frame and prolong the service life of the entire frame，The forks are forged forks to ensure the strength of the fork and improve the safety factor. High efficency hydraulic system, lower fuel consumption, ergonomic handle and seat design provides comfort and convenience operation experience.
Parámetros técnicos
Efficiency
- High travel speed
- Small turning radius and good adaptability to various working sites
- Short total cycle time with flexible movement
Safety
- Reliable braking system
- Safe and comfortable operating environment
Energy Saving & Green Initiative
- Remarkable fuel and energy conservation, save 25% based on same configuration
- Low noise
Reliability & Durability
- Reliable drive system
- Upgraded hydraulic system
- New design concept of electrical system
- Optimal designed structural components, Have passed 200,000 times of fatigue enhancement tests
| Model | LG50F |
| Load Capacity | 5000kg |
| Engine | Yunnei 4102/76KW |
| Axle | Big wheel side weighted cast steel bridge |
| Tyres | Steel wire tire 16/70-24 |
| Gearbox | 280 double high low speed gearbox |
| Min.turning radius | 4800mm |
| Mast width | 180mm |
| Lift height | 3000mm |
| Full-load maximum gradeability | <35° |
| Fork size | 1220mm |
| Frame articulation | Front 500mm, rear300mm |
| Driving type | Four-wheel drive |
| Minimum ground clearance | 300mm |
| Fornt tilt angle | 14° |
| Mast height | 2790mm |
| Diemension | 4150/1945/2450mm |
Our factory has passed various certifications including ISO9000; CE and so on.
1.How long is your lead time?
15-20days after receiving the deposit
2.How is the warranty?
Our warranty time is 6 months from date of machine arriving at your destination port.
3.Do you have any machine in stock?
No, every machine is manufactured according to customer request. This ensures higher quality.
4.Could you do OEM?
Yes, OEM is acceptable. We could make the unique machine as per your specific configuration and requirements.
5.What is the advantage of LAIGONG?
All of our machines passed CE test, We strictly follow the CE standard to produce the loaders, and each of them is passed our rigorous inspection.
Our factory is passed ISO9000 and ISO4000 test.
6.What kind of service can we get from LAIGONG?
If there is any using problem, we can provide online or video guidance.
If there is any quality problem, we will provide solutions through your pictures or your description, or our local dealer could also service on-site.
Our service department has no holiday, always stand by for you and respond within 5 hours.
7.Why do you choose LAIGONG?
LAIGONG Equipment established in 2018, In the earlier period, we only designed and manufactured the chassis frames, since 2011, we have started to assemble the loaders, we had gained lot of experience during these 5 years and summarized that the frame's quality decide the loader's quality, so our products are more practical and more reliable.
PRODUCTOS RELACIONADOS
Mensaje del producto
* Nota: Asegúrese de completar la información con precisión y mantener la comunicación abierta. Nos pondremos en contacto con usted lo antes posible.
